RATE LIST FOR PV TESTING
| No | Description | Number of Modules | ||||
| 1 – 5 | 6 – 25 | 26 – 99 | 100 – 500 | > 500 | ||
| 1 | Electroluminescence Imaging with analysis | 3,000 | 2,500 | 2,000 | 1000 | 650 |
| 2 | Real Power at Standard Testing Conditions | 18,000 | 12,000 | 10,000 | 7,500 | 7,500 |
| 3 | Real Power Measurements under low Irradiance @ 200W | 9,000 | 8,000 | 7,500 | 7,000 | 7,000 |
| 4 | Wet Leakage Test | 15,000 | 13,000 | 10,000 | 8,000 | 8,000 |
| 5 | Dry insulation test | 8,000 | 7,000 | 6,000 | 6,000 | 6,000 |
| 6 | Real Power measurement and comparison after preconditioning (Light Induced degradation) | 20,000 | 18,000 | 15,000 | 12,500 | 12,500 |
| 7 | Peel-Off Test | 28,000 | 25,000 | 20,000 | – | – |
| 8 | Potential Induced Degradation @ 1,000 V | 45,000 | 40,000 | 35,000 | – | – |
| 9 | Hot Spot Test (4 shading levels) | 40,000 | 35,000 | 30,000 | – | – |
| 10 | EVA Encapsulant cross-linking (2 samples) | 30,000 | 28,000 | 25,000 | – | – |
| 11 | Thermal Imaging | 7,000 | 6,000 | 5,000 | – | – |
| 12 | Bypass thermal Diode Test | 13,500 | 12,000 | 10,000 | – | – |
| 13 | Ground Continuity Test | 2,000 | 1,500 | 1,000 | – | – |
| 14 | Impact Test (Module Breakage Test) | 13,000 | 12,000 | 10,000 | – | – |
| 15 | UV Preconditioning Test | 44,000 | 38,000 | 30,000 | – | – |
| 16 | Impulse Voltage Test | 6,600 | 6,000 | 5,000 | – | – |
| 17 | Reverse Current Overload Test | 6,600 | 6,000 | 5,000 | – | – |
| 18 | Mechanical Load Test | 50,000 | 45,000 | 40,000 | – | – |
| 19 | Hail Impact Test | 35,000 | 32,000 | 30,000 | – | – |
| 20 | IV curve test for PV strings | 0.5 Million /MW | – | – | – | – |
List updated in January 2021